Modification of the threadline dynamics has effected significant alternations in the structure
and improvements in the properties of high‐speed melt spun poly (ethylene …

Fiber melt spinning of poly (ethylene terephthalate)(PET) was studied via modification of
threadline dynamics. Several techniques were implemented in the high‐speed spinning …

The process of melt‐spinning poly (ethylene terephthalate)(PET) filament at high speeds
was modified through the inclusion of a liquid isothermal bath (LIB) in the spinline. A wide …

Poly (ethylene terephthalate) fibers with improved mechanical properties and dimensional
stability were spun via controlled threadline dynamics by a liquid isothermal bath (LIB) …

Some properties and structural aspects of fibers obtained by spinning, in a wide range of
take‐up speed (2,800–4,400 m/min), of commercial samples of PET, produced by dimethyl …

The fast structure development process in the early stage of crystallization in commercial
polyethylene terephthalate (PET) fibers during carefully controlled postspinning annealing …

Polyethylene terephthalate (PET) was spun into fibers in the speed range of 3000 to 5000
m/min. Threadline dynamics was modified by altering the threadline temperature profile …

Effects of the molecular weight (intrinsic viscosity) of poly (ethylene terephthalate) on the
formation of fibers and their properties are analyzed. Correlations between molecular weight …

A series of branched poly (ethylene terephthalate) samples was prepared by employing
0.07–0.42 mol% trimethylolpropane (TMP) for melt polycondensation. These polymers were …

The mechanism of thermally induced elongation in poly (ethylene terephthalate) fiber spun
at 3500 m min− 1 has been examined. This partially oriented fiber has a crystalline content …