The high‐speed melt spinning of sheath/core type bicomponent fibers was performed and
the change of fiber structure with increasing take‐up velocity was investigated in comparison …

The high‐speed melt spinning of sheath/core type bicomponent fibers was performed and
the change of fiber structure with increasing take‐up velocity was investigated. Two kinds of …

High speed spinnings of sheath/core= Poly (ethylene terephthalate)/Polyethylene (PET/PE)
and PE/PET Bicomponent fibers were carried out and the tensile behavior of the as-spun …

Abstract, High-speed melt spinning of sheath-core type bicomponent fibers was performed
and the change of fiber structure with increasing take-up velocity was investigated. Four …

The high-speed spinning of sheath/core type bicomponent fibers consisting of high
molecular weight polyethylene terephthalate)(HMPET) and low molecular weight poly …

High‐speed bicomponent spinning of poly (ethylene terephthalate)(PET)(core) and poly‐
propylene (PP)(sheath) was carried out and the structure development in the individual …

Four kinds of ethylene terephthalate/ethylene isophthalate copolymers (PET/PEI, PEI= 0, 2,
5, 10 mol%) were prepared and melt spun at take-up velocities from 1 to 7 km/min …

Flat fibers and hollow fibers were prepared through the high‐speed melt spinning of poly
(ethylene terephthalate)(PET), and the structures of these fibers were compared with those …

The blend of poly (ethylene terephthalate)(PET) and a small amount of polymer that has
higher T g than PET, such as polymethylmethacrylate (PMMA)—and is dispersed finely as …

Fiber spinning of polyethylene terephthalate (PET) was studied at take‐up speeds ranging
from 2000 m/min to 7000 m/min under various spinning conditions. Effects of changes in …