The high hardness or yield strength of an alloy is known to benefit from the presence of
small-scale precipitation, whose hardening effect is extensively applied in various …

Nanoscale precipitations in deformed dilute alloying Mg-Zn-RE alloys usually play critical
positive roles in mechanical properties, while characterizing them still poses a significant …

The effects of different manganese (Mn) content of 0–0.8 wt% on the microstructures and
room-temperature tensile properties of Mg-15Gd-1Zn (wt%) alloys have been investigated …

Sc-containing Mg alloys have attracted increasing attention since Sc is believed to improve
the mechanical properties and corrosion resistance of the alloys. In this work, effects of Sc …

Mg and its alloys have been extensively used in many fields given their low density and
extensive resources. However, their strength and plasticity cannot satisfy the requirements of …

The effects of pre-ageing treatment on the microstructure and mechanical properties of the
Mg-9.2 Gd-4.4 Y-1.0 Zn-0.8 Mn (wt.%) alloy were investigated. Microstructural analysis …

Abstract The effect of 0–1.8 wt.% Sn addition on the microstructure and tensile properties of
Mg–6Al–4Zn alloys was investigated. The results indicate that α-Mg dendrite is gradually …

At present, the mechanical properties of the Mg–3Sn–2Ca magnesium alloy are not
satisfying and further enhance needs to be considered via further alloying/microalloying …

The long period stacking ordered (LPSO) phase is a key strengthening precipitate phase in
the Mg-Y-Zn based alloys. Fully controlled by the chemical ordering and stacking faults, the …

Abstract A novel Mg-8Gd-2Y-1.5 Zn-1Mn (GYZ-1Mn, wt.%) alloy with extraordinary high-
temperature mechanical properties was developed by introducing RE/Zn segregation on α …