An ultralow-power dual-band UWB impulse radio
In this brief, we present a dual-band ultralow-power ultrawideband (UWB) impulse radio
(UWB-IR) transceiver in a 90-nm CMOS process for low-data-rate UWB on-off keying (OOK) …
(UWB-IR) transceiver in a 90-nm CMOS process for low-data-rate UWB on-off keying (OOK) …
A 18-pJ/pulse OOK CMOS transmitter for multiband UWB impulse radio
TA Phan, J Lee, V Krizhanovskii… - IEEE Microwave and …, 2007 - ieeexplore.ieee.org
This letter presents a new transmitter for multiband impulse radio ultra-wideband (IR-UWB)
systems. The ultra low-power, low-complexity UWB transmitter operates over three 528-MHz …
systems. The ultra low-power, low-complexity UWB transmitter operates over three 528-MHz …
A 6μw, 100kbps, 3-5GHz, UWB impulse radio transmitter
In this paper we present the design and the measured results for a FCC-compliant UWB
impulse transmitter (Tx) designed to operate in the 3-5GHz range. The transmitter uses a fast …
impulse transmitter (Tx) designed to operate in the 3-5GHz range. The transmitter uses a fast …
A reconfigurable, 0.13 µm CMOS 110pJ/pulse, fully integrated IR-UWB receiver for communication and sub-cm ranging
Impulse radio ultra-wideband (IR-UWB) proved to be a strong candidate for energy-efficient
communication and ranging, resulting in multiple low-energy IR-UWB implementations …
communication and ranging, resulting in multiple low-energy IR-UWB implementations …
Ultra‐low power low‐complexity 3–7.5 GHz IR‐UWB transmitter with spectrum tunability
An impulse radio ultra‐wideband (IR‐UWB) transmitter (TX) consuming ultra‐low power is
presented. The low‐complexity topology features control of the power spectral density (PSD) …
presented. The low‐complexity topology features control of the power spectral density (PSD) …
A 0.65-to-1.4 nJ/burst 3-to-10 GHz UWB all-digital TX in 90 nm CMOS for IEEE 802.15. 4a
J Ryckaert, G Van der Plas, V De Heyn… - IEEE Journal of Solid …, 2007 - ieeexplore.ieee.org
We propose an all-digital UWB transmitter architecture that exploits the low duty cycle of
impulse-radio UWB to achieve ultra-low power consumption. The design supports the IEEE …
impulse-radio UWB to achieve ultra-low power consumption. The design supports the IEEE …
An ultra-wideband impulse-radio transceiver chipset using synchronized-OOK modulation
M Crepaldi, C Li, JR Fernandes… - IEEE Journal of Solid …, 2011 - ieeexplore.ieee.org
This work presents a low-complexity IR-UWB chipset which achieves synchronization and
demodulation at the receiver relying only on a ring oscillator clock. The modulation scheme …
demodulation at the receiver relying only on a ring oscillator clock. The modulation scheme …
A 21.3%-efficiency clipped-sinusoid UWB impulse radio transmitter with simultaneous inductive powering and data receiving
An ultra-wide-band impulse-radio (UWB-IR) transmitter (TX) for low-energy biomedical
microsystems is presented. High power efficiency is achieved by modulating an LC tank that …
microsystems is presented. High power efficiency is achieved by modulating an LC tank that …
A 750 Mb/s, 12 pJ/b, 6-to-10 GHz CMOS IR-UWB transmitter with embedded on-chip antenna
VV Kulkarni, M Muqsith, K Niitsu… - IEEE Journal of Solid …, 2009 - ieeexplore.ieee.org
This paper presents a novel impulse radio based ultra-wideband transmitter. The transmitter
is designed in 0.18 \mu m CMOS process realizing extremely low complexity and low power …
is designed in 0.18 \mu m CMOS process realizing extremely low complexity and low power …
A high data-rate energy-efficient interference-tolerant fully integrated CMOS frequency channelized UWB transceiver for impulse radio
A Medi, W Namgoong - IEEE Journal of Solid-State Circuits, 2008 - ieeexplore.ieee.org
A pulse-based ultra-wideband transceiver (UWB-IR) operating in the 3.25-4.75 GHz band
designed for low power and high data rate communication is implemented in 0.18 mum …
designed for low power and high data rate communication is implemented in 0.18 mum …