We report on the properties of one example of a new family of metallic alloys which exhibit
excellent glass forming ability. The critical cooling rate to retain the glassy phase is of the …

Formation of bulk metallic glass in quaternary Ti–Zr–Cu–Ni alloys by relatively slow cooling
from the melt is reported. Thick strips of metallic glass were obtained by the method of metal …

During the past several years, a number of multicomponent alloy families have been
investigated in which the liquid alloys form metallic glass at cooling rates below 1000 K/s …

We have discovered a series of bulk metallic glass-forming alloys of composition (Zr x Cu
100− x) 80 (Fe 40 Al 60) 20 with x= 68–77 and have investigated them by x-ray diffraction …

The flow and relaxation of the Zr46. 75Ti8. 25Cu7. 5Ni10Be27. 5 bulk metallic glass forming
alloy was investigated in the supercooled liquid state and the glass transition region using …

Ab initio molecular dynamics (AIMD) calculations were performed on the atomic
configuration of Zr41. 2Ti13. 8Cu12. 5Ni10Be22. 5 bulk metallic glass. The local structures …

Zr41. 2Ti13. 8Cu12. 5Ni10. 0Be22. 5 bulk metallic glasses were prepared by cooling the
melt with a rate of about 10 K/s and investigated with respect to their chemical and structural …

The following article is based on the MRS Medal talk presented by William L. Johnson at the
1998 MRS Fall Meeting on December 2, 1998. The MRS Medal is awarded for a specific …

The viscosity of the Zr46. 75Ti8. 25Cu7. 5Ni10Be27. 5 bulk metallic glass forming alloy in
the supercooled liquid was measured using parallel plate rheometry. The measurements …

抄録 Bulk glassy Zr 55 Al 10 Ni 5 Cu 30 alloys in a cylindrical form with a diameter up to 16
mm and a length of 70 mm were produced by sucking the molten alloy into a copper mold …