In this study, the microstructure evolution of semi-solid Mg–10Gd–3Y–0.5 Zr alloy during
isothermal heat treatment has been investigated. The results show that primary particles …

Microstructure evolution of extruded Mg-2Zn-0.5 Y (at%) alloy in semisolid isothermal heat
treatment process was investigated. The results show that in the alloy there are α-Mg, Mg3 …

A semi-solid microstructure of Mg–10Zn–6.8 Gd–4Y alloys is acquired via an isothermal
heat treatment process, and the effects of the holding time on the microstructure evolution of …

Semi-solid billets of Mg-7Zn and Mg-7Zn-0.3 La alloys were prepared by semi-solid
isothermal heat treatment. The effects of the La element on the as-cast and semi-solid …

The effects of semi-solid isothermal process parameters on the microstructure evolution of
Mg-Gd rare earth alloy produced by strain-induced melt activation (SIMA) were investigated …

The semisolid billets of Mg-10Gd-3Y-1Zn-0.4 Zr (wt%) alloy were prepared by the strain-
induced melt activation (SIMA) route, and the effects of isothermal heating parameters on the …

The microstructure evolution and dynamic precipitation behavior of Mg–10Gd–4Y–1Sm–0.5
Zr alloy during backward hot extrusion are studied. The results show that the equiaxed …

In the present study, a Mg‐Y‐RE‐Zr alloy was isothermally heat treated in semi‐solid mushy
region. The experimental alloy was deliberately composed of a higher amount of Zr (1.9 …

The cooling rate has significant effects on the microstructure of Mg-Gd-Y-Zr alloy. It is found
that the increase of cooling rate can refine the solidified microstructure obviously. The grains …

The effect of Zr, Mn and Mn+ Sc additions on the grain size of Mg–10Gd alloy has been
investigated and the grain refinement mechanisms are also suggested. The results reveal …