The influence of Ag substitution for Cu on glass-forming ability and thermal properties of Mg-based bulk metallic glasses
A group of pseudo-ternary Mg–(Cu–Ag)–Dy bulk metallic glasses (BMGs) was developed by
copper mold casting. The glass-forming ability (GFA) is significantly improved by the …
copper mold casting. The glass-forming ability (GFA) is significantly improved by the …
Formation of ternary Mg-Cu-Dy bulk metallic glasses
XF Wu, Y Kang, FF Wu, KQ Qiu, LK Meng - Bulletin of Materials Science, 2011 - Springer
The glass-forming ability (GFA) of ternary Mg-Cu-Dy alloys was systematically investigated
by using differential scanning calorimetry (DSC) and X-ray diffractometry (XRD) techniques …
by using differential scanning calorimetry (DSC) and X-ray diffractometry (XRD) techniques …
The effect of Ni substitution on the glass-forming ability and mechanical properties of Mg–Cu–Gd metallic glass alloys
The effect of substitution of Ni for Cu on the glass forming ability and mechanical properties
was studied in Mg65Cu25− xNixGd10 (x= 0, 5, 10, 15, 20, 25) alloys by thermal analysis and …
was studied in Mg65Cu25− xNixGd10 (x= 0, 5, 10, 15, 20, 25) alloys by thermal analysis and …
Glass-forming ability for Mg-Cu-Nd alloys
KQ Qiu, QF Li, YL Ren, WH Jiang, XG Yuan - Metallurgical and Materials …, 2008 - Springer
The glass-forming ability (GFA), thermal stability, and mechanical properties of ternary Mg-
Cu-Nd alloys were investigated. The results show that the amorphous structure of about 3 …
Cu-Nd alloys were investigated. The results show that the amorphous structure of about 3 …
Mg-Cu (Ag)-Gd Bulk metallic glass forming alloy: Phase selection of melt crystallization
Q Zheng - Science of Advanced Materials, 2012 - ingentaconnect.com
The solidification microstructure of the master alloys (MAs) and slowly cooled alloys (SCAs)
for Mg-Cu-Gd ternary system and the best glass former in Mg-Cu-Ag-Gd quaternary system …
for Mg-Cu-Gd ternary system and the best glass former in Mg-Cu-Ag-Gd quaternary system …
Fabrication of ternary Mg–Cu–Gd bulk metallic glass with high glass-forming ability under air atmosphere
H Men, DH Kim - Journal of materials research, 2003 - cambridge.org
A new Mg65Cu25Gd10 alloy having significantly improved glass-forming ability (GFA) has
been developed. In this article, we show that the ternary Mg65Cu25Gd10 bulk metallic glass …
been developed. In this article, we show that the ternary Mg65Cu25Gd10 bulk metallic glass …
The effect of Ag addition on the glass-forming ability of Mg–Cu–Y metallic glass alloys
ES Park, HG Kang, WT Kim, DH Kim - Journal of Non-Crystalline Solids, 2001 - Elsevier
The effect of Ag substitution for Cu on the glass forming ability was studied in Mg65Cu25−
xAgxY10 (x= 0, 5, 10, 15, 20, 25) alloys by using thermal analysis and X-ray diffractometry …
xAgxY10 (x= 0, 5, 10, 15, 20, 25) alloys by using thermal analysis and X-ray diffractometry …
Structure, properties, and crystallization of Mg-Cu-Y-Zn bulk metallic glasses
Abstract The Mg 60 Cu 30 Y 10 and Mg 65 Cu 20 Y 10 Zn 5 bulk metallic glasses in the form
of a rod 2 mm in diameter were successfully prepared by the conventional Cu-mold casting …
of a rod 2 mm in diameter were successfully prepared by the conventional Cu-mold casting …
Mg-based bulk glassy alloys with high strength above 900 MPa and plastic strain
Bulk metallic glasses with a maximum diameter of 2.5–5 mm were formed in
Mg75Cu5Ni10Gd10, Mg70Cu15Ni5Gd10, and Mg65Cu20Ni5Gd10 systems by copper mold …
Mg75Cu5Ni10Gd10, Mg70Cu15Ni5Gd10, and Mg65Cu20Ni5Gd10 systems by copper mold …
Glass-forming ability of Mg–Cu–Ni–Gd bulk metallic glasses with high strength
J Yin, X Ma, Z Zhou - Transactions of the Indian Institute of Metals, 2014 - Springer
The glass-forming ability (GFA) of Mg–Cu–Ni–Gd alloy system was evaluated using copper
mold casting. A three-dimensional composition map of Mg–Cu–Ni–Gd system with GFA over …
mold casting. A three-dimensional composition map of Mg–Cu–Ni–Gd system with GFA over …