Formation of bulk metallic glass in quaternary Ti–Zr–Cu–Ni alloys by relatively slow cooling
from the melt is reported. Thick strips of metallic glass were obtained by the method of metal …

We report on the properties of one example of a new family of metallic alloys which exhibit
excellent glass forming ability. The critical cooling rate to retain the glassy phase is of the …

Since the first success of a bulk glassy alloy in La–Al–Ni system in 1989, 1) much attention
has been paid to the development of alloy systems with high glass-forming ability (GFA) …

Composites of the Cu47Ti34Zr11Ni8 bulk metallic glass, reinforced with up to 30 vol% SiC
particles are synthesized and characterized. Results based on x-ray diffraction, optical …

Results of calorimetric, differential thermal analysis, and structural measurements are
presented for a series of bulk metallic glass forming compositions in the Zr–Ti–Cu–Ni–Be …

During the past several years, a number of multicomponent alloy families have been
investigated in which the liquid alloys form metallic glass at cooling rates below 1000 K/s …

The viscosity of the equilibrium melt as well as of the undercooled liquid of bulk metallic
glass (BMG) forming Zr–Ti–Cu–Ni–Be alloys is several orders of magnitude higher than in …

A large supercooled liquid region exceeding 60 K before crystallization was found in a wide
composition range of 15 to 20 at% Cu and 25 to 30 at% Ni for the Ti 94− x− y Cu x Ni y Si 4 B …

Ti-based alloy powders produced by the high pressure gas atomization technique were
found to consist of an amorphous single phase in the particle size range below 32 μm for Ti …

The thermal property, crystallization behavior, glass forming ability (GFA) and mechanical
properties of Ti-based amorphous alloys were studied by using differential scanning …