High speed spinnings of sheath/core= Poly (ethylene terephthalate)/Polyethylene (PET/PE)
and PE/PET Bicomponent fibers were carried out and the tensile behavior of the as-spun …

The high‐speed melt spinning of sheath/core type bicomponent fibers was performed and
the change of fiber structure with increasing take‐up velocity was investigated in comparison …

The high‐speed melt spinning of sheath/core type bicomponent fibers was performed and
the change of fiber structure with increasing take‐up velocity was investigated. Two kinds of …

The change of crimp contraction and shrinkage in the melt spinning and drawing process of
polyethylene terephthalate (PET) side‐by‐side bicomponent fibers was studied. Regular …

The high-speed spinning of sheath/core type bicomponent fibers consisting of high
molecular weight polyethylene terephthalate)(HMPET) and low molecular weight poly …

High‐speed bicomponent spinning of poly (ethylene terephthalate)(PET)(core) and poly‐
propylene (PP)(sheath) was carried out and the structure development in the individual …

Abstract, High-speed melt spinning of sheath-core type bicomponent fibers was performed
and the change of fiber structure with increasing take-up velocity was investigated. Four …

The effects of blend composition and take-up velocity on structural variations and physical
properties of poly (ethylene terephthalate)[PET]/poly (ethylene-2, 6-naphthalate)[PEN] blend …

Poly (ethylene terephthalate)(PET) fiber is obtained by polystyrene (PS)/PET sheath/core
conjugate melt spinning and removal of the PS component. The fiber is drawn under heating …

Four kinds of ethylene terephthalate/ethylene isophthalate copolymers (PET/PEI, PEI= 0, 2,
5, 10 mol%) were prepared and melt spun at take-up velocities from 1 to 7 km/min …