The microstructure and mechanical properties of AISI D2 tool steel with up to 1.5 wt%
niobium additions were investigated. The microstructural evolutions were characterized by …

Studies of H13 steel suggest that under appropriate conditions, additions of rare-earth
metals (REM) can significantly enhance mechanical properties, such as impact toughness …

Abstract Effect of Zr-Ti combined deoxidation on the microstructures and mechanical
properties of high-strength low-alloy steels were investigated by means of microstructure …

This article describes the tensile properties and fracture characteristics of a 12Cr oxide
dispersion strengthened (ODS) ferritic steel with unique elongated bimodal grain size …

Cladding material development is essential for the realization of highly efficient high burn-up
operation of the next generation nuclear systems, where numerous requirements are …

In this study, an austenitic oxide dispersion strengthened (ODS) heat resistance steel with
added Y 2 O 3 is fabricated by process of mechanical alloying (MA) and hot isostatic …

The hot ductility of a 1Cr–0.5 Mo low alloy steel is investigated over a temperature range of
700–1050° C using a Gleeble thermomechanical simulator in conjunction with various …

The influence of minor Ce doping on the evolution mechanisms of microstructure and
mechanical performances of EH47 grade HSLA steel for marine engineering was …

The influence of different soaking temperatures in the range 973–1623 K (below Ac 1 to
above Ac 4) before oil quenching and tempering, on the microstructure, hardness, grain …

Aging treatments at 400–550° C are commonly used to attain a peak strengthening for the
Cu-rich nanocluster-strengthened high-strength low-alloy (HSLA) steels. However, these …