Incipient deformation twinning in dynamically sheared bcc tantalum
Mechanical twinning has been introduced into a body-centered cubic metal, tantalum,
through shear-dominant dynamic loading at a high shear strain rate (up to 3× 10 4/s) at 77 K …
through shear-dominant dynamic loading at a high shear strain rate (up to 3× 10 4/s) at 77 K …
Formation of 60< 011̅0> boundaries between {101̅2} twin variants in deformation of a magnesium alloy
Interrupted tensile testing along the normal direction of a rolled AZ31 magnesium plate was
conducted at various strain levels from 6% to 15.5%. Prior to deformation the specimens …
conducted at various strain levels from 6% to 15.5%. Prior to deformation the specimens …
Atomistic simulations of interaction between basal< a> dislocations and three-dimensional twins in magnesium
Dislocation slip and twinning are equally important in the plastic deformation of hexagonal
close packed crystals. Basal slip and extension 10 1¯ 2< 1¯ 011> twins can be activated …
close packed crystals. Basal slip and extension 10 1¯ 2< 1¯ 011> twins can be activated …
Crystallographic characters of {11¯ 22} twin-twin junctions in titanium
Abstract contraction twins that are commonly activated in α-titanium interact to each other
and form three types of twin–twin junctions (,, TTJs) corresponding to the crystallography of …
and form three types of twin–twin junctions (,, TTJs) corresponding to the crystallography of …
Deformation twinning in nanocrystalline materials
Nanocrystalline (nc) materials can be defined as solids with grain sizes in the range of 1–
100 nm. Contrary to coarse-grained metals, which become more difficult to twin with …
100 nm. Contrary to coarse-grained metals, which become more difficult to twin with …
In Situ Characterization of the Effect of Twin-Microstructure Interactions on {1 0 1 2} Tension and {1 0 1 1} Contraction Twin Nucleation, Growth and Damage in …
Through in situ electron backscatter diffraction (EBSD) experiments, this paper uncovers
dominant damage mechanisms in traditional magnesium alloys exhibiting deformation …
dominant damage mechanisms in traditional magnesium alloys exhibiting deformation …
Formation of fivefold deformation twins in nanocrystalline face-centered-cubic copper based on molecular dynamics simulations
AJ Cao, YG Wei - Applied physics letters, 2006 - pubs.aip.org
Fivefold deformation twins were reported recently to be observed in the experiment of the
nanocrystalline face-centered-cubic metals and alloys. However, they were not predicted …
nanocrystalline face-centered-cubic metals and alloys. However, they were not predicted …
Slip transmutation between basal< a> dislocation and {112¯ 1} twinning across {112¯ 4} twin boundary in titanium
Molecular dynamics simulations reveal slip transmutation mechanisms between basal< a>
dislocations and {11 2¯ 1} twinning in titanium. When a co-planar pileup of basal< a> …
dislocations and {11 2¯ 1} twinning in titanium. When a co-planar pileup of basal< a> …
Deformation twinning and its effect on crack extension
QH Tang, TC Wang - Acta materialia, 1998 - Elsevier
Deformation twinning near a crack tip is observed in bcc metal Mo based on molecular
dynamics simulation at temperature T= 50K and loading rate K ̇ II= 0.0706 MPa m 1/2/ps …
dynamics simulation at temperature T= 50K and loading rate K ̇ II= 0.0706 MPa m 1/2/ps …
Determination of twinning path from broken symmetry: A revisit to deformation twinning in bcc metals
Deformation twinning in crystals is one of the major strain carrier during plastic deformation,
which plays a critical role in determining the mechanical properties of metals and alloys …
which plays a critical role in determining the mechanical properties of metals and alloys …