In this paper, the microstructural evolution, precipitation behavior and mechanical properties
of 2195 Al-Li alloys prepared by powder metallurgy (PM) combined with hot extrusion were …

The processability and final mechanical properties of Al-Li alloys are strongly affected by the
uniformity of solute element and the degree of recrystallization, which can be improved via …

The addition of minor Mg (~ 0.4 wt%) to Al-Cu-Li alloy could not only modify the precipitation
path but also promote the precipitation of T 1 (Al 2 CuLi) phase, however, the influence of …

The microstructure and mechanical properties of a 2024 Al alloy subjected to different levels
of cold-rolling at room temperature and their evolution upon ageing at 453K were …

The microstructural evolution during homogenization treatment and the recrystallization
behavior caused by Al 3 Zr precipitate in 2195 alloy were investigated via scanning electron …

The quenching expansion tests in the temperature range 350–500℃ and isothermal
compression tests in the range 350–500℃ & 0.01–10 s− 1 of a homogenized Al-Cu-Li alloy …

To clarify the influence of a pre-ageing treatment on precipitation behaviors in the AA7075
aluminum alloys with ultrafine grain (UFG) structure, the alloys were pre-aged prior to a …

To improve the recrystallization resistance of 2195 Al–Cu–Li alloys, we proposed a two-step
homogenization (TS) to facilitate the homogeneous nucleation of Al 3 Zr, and the effect of Al …

Dynamic recrystallization (DRX) is one of the more convenient and effective means of
refining grains during hot deformation, which is closely related to the precipitation behavior …