B Vishwanadh, S Majumdar, J Orsborn, R Banerjee… - Intermetallics, 2015 - Elsevier
The present paper describes the morphology, chemistry and crystallography of the phases observed in the silicide coatings produced by pack cementation technique on Nb based …
J Cheng, S Yi, JS Park - Journal of Alloys and Compounds, 2015 - Elsevier
Phase formations during Si and B co-deposition by a halide activated pack cementation on Nb–Si–B alloys and the oxidation behaviors of the alloys were investigated together with …
J Li, XP Guo - Key Engineering Materials, 2013 - Trans Tech Publ
The microstructure and high-temperature oxidation-resistant performance of several silicide coatings on an Nb-Ti-Si based alloy were revealed in the present work. These silicide …
Y Zhang, XP Guo - Materials Science Forum, 2011 - Trans Tech Publ
In order to improve the oxidation resistance of silicide coatings on an Nb silicide based alloy, Si-B co-deposition coatings were prepared at 1150° C for 8 h by using pack mixtures …
X Tian, X Guo - Surface and Coatings Technology, 2009 - Elsevier
In order to prepare Al-modified silicide coatings on an Nb-based ultrahigh temperature alloy, both a two-stage pack cementation technique and a co-deposition pack cementation …
Y Qiao, X Guo - Applied surface science, 2010 - Elsevier
Cr-modified silicide coatings were prepared on a Ti–Nb–Si based ultrahigh temperature alloy by Si–Cr co-deposition at 1250° C, 1350° C and 1400° C for 5–20h respectively. It was …
BA Pinto, ASCM d'Oliveira - Surface and Coatings Technology, 2021 - Elsevier
Niobium silicide coatings were processed on Nb metal using double pack cementation procedures at temperatures in the range 1000° C–1200° C for up to 6 h. Coating thickness …
W Ran, Y Qiao, X Guo - Surface and Coatings Technology, 2022 - Elsevier
Micromechanical properties of Al, Y-modified silicide coating on Nbsingle bondSi based alloy were investigated in this paper. The silicide coating prepared by pack cementation …
P Zhang, X Guo - Surface and coatings technology, 2011 - Elsevier
Y and Al modified silicide coatings were prepared on an Nb–Ti–Si based ultrahigh temperature alloy by co-depositing Si, Al and Y at 1150° C for up to 10h, respectively. The …