The microstructure and mechanical properties of Mg–3Sn–xZn–1Al alloys were investigated.
It was found that the grain size was basically similar, and the amount of fine Mg 2 Sn particle …

The microstructures and the phases of the Mg–6Zn–3Sn–2Al alloy in the different states
were characterized by OM, XRD and TEM. Almost all the MgZn phase was dissolved in the …

High performance Mg–6Al–3Sn–0.25 Mn–x Zn alloys (x= 0, 0.5, 1.0, 1.5, and 2.0 wt%)
without rare earth were designed. The effects of different Zn contents on the microstructure …

The microstructure and mechanical properties of Mg-Sn-Ca-Ce alloys with different Ce
contents (0.0, 0.2, 0.5, 1.0 wt%) were studied at room temperature. Ce additions to ternary …

The microstructure and mechanical properties of Mg-xSn (x= 3, 7 and 14, mass fraction,%)
alloys extruded indirectly at 300° C were investigated by means of optical microscopy …

The microstructures and tensile properties of the as-cast and heat treated Mg–7Zn–5Al
based alloys with 1–6wt.% Sn addition were studied. The results show that all the Sn …

Abstract For the Mg–Sn–Al alloys, the ultimate strength (UTS) of an extruded Mg–9wt.% Al–
2wt.% Sn alloy reached 390 MPa. TEM observation indicated that plate-like Mg 17 Al 12 …

The microstructure and mechanical properties of an indirect-extruded Mg–8Sn–1Al–1Zn
(TAZ811) alloy were investigated and compared with those of a commercial Mg–3Al–1Zn …

We investigated the effects of Ag addition on the microstructure and mechanical properties
of hot-extruded Mg–6Zn–2Sn–0.4 Mn-based alloys. Ag addition resulted in the formation of …

The microstructures and the phases of the as-cast Mg–6Zn–2Al alloys with Sn additions
were characterized by XRD, SEM and TEM. They were composed of α-Mg, MgZn and …