Influence of nanoclay amount on surface properties of the nanocomposites was investigated
using Fourier transform infrared spectroscopy (FTIR), atomic force microscopy (AFM) …

Poly ethylene terephthalate (PET)-based nanocomposites containing three differently
modified clays were prepared by melt compounding. The influence of type of modified clay …

The effects of clays as nanoscale fillers have been rarely addressed. Influence of the amount
of organoclay (ranging between 1 and 10 wt.%) on the nanocomposites structure, ie …

Polypropylene/surface modified clay nanocomposites were prepared by melt intercalation in
twin-screw extruder followed by blown film extrusion. The effects of organically modified clay …

Intercalated/exfoliated nanocomposites of thermoplastic polyolefin (TPO) blended nanoclay
(Cloisite 20 A and Cloisite 30B) were fabricated using melt extrusion process. Polypropylene …

The structure, morphology and mechanical properties of polypropylene-nanoclay
composites containing 1 to15 wt.% nanoclay was investigated. Combination of wide-angle x …

The use of nanoclays as additives for polymer matrices requires, in some cases (with non-
polar matrices) the use of a compatibilizer agent which will act as a bridge or permanent …

The effect of nanoclay (NC) loading (0, 2.5 and 5 phr) and almond shell flour (ASF) content
(30, 35 and 40%) on the strength properties of polypropylene composites was evaluated …

Abstract Poly (ethylene oxide)(PEO)/clay nanocomposites were prepared by a solution
intercalation method using chloroform as a solvent. The nanocomposites were characterised …

Polypropylene (PP)/clay nanocomposites prepared by melt blending technique using
different percentages of clay with and without maleic anhydride grafted PP (MA‐PP) were …