Mechanical properties of as-rolled magnesium alloy sheets show an obvious anisotropy
during rolling. To get sheets with excellent performance and investigate the effect of …

The Mg–3Al–1Zn magnesium alloy sheets with initial extrusion and casting microstructures
were symmetrically rolled at a high temperature of 823K, followed by a warm rolling at 498K …

Abstract {10− 12} tensile twins were introduced by in-plane compression in a thin
magnesium alloy sheet in order to tailor the texture. The room temperature stretch formability …

To investigate the interrelation of dynamic recrystallization and detwinning behaviors,
especially during the inchoate deformation stage at elevated temperatures, a commercial …

Nanocrystalline surface layers and gradient nanostructures are produced in AZ31 Mg alloy
through surface mechanical attrition treatment (SMAT). The grain sizes in the surface layer of …

Uniaxial compression test data were obtained from magnesium alloy AZ31B sheet material
tested along three sample directions (rolling, transverse and normal direction) over the …

Commercial AZ31 Mg alloys sheet was hot rolled by 50% thickness reduction in a single
pass. The rolling process was manually interrupted before the entire sheet was rolled, and …

The effect of rolling speeds varying from 0.1 to 0.4 m/s on texture modifications and
mechanical properties of AZ31 magnesium alloy sheets processed by a combination of …

The rolling direction (RD) and transverse direction (TD) samples with distinct difference in
initial texture were cut from differential speed rolled ZK60 magnesium alloy sheet and were …

Poor formability of rolled magnesium (Mg) alloys extremely restricts applications in form of
sheets originating from formation of strong basal texture. Recently, we found that increasing …