The microstructures and mechanical properties of Inconel 718 (IN718) alloy fabricated by
selective laser melting (SLM) are evaluated in as-built, direct aging (DA), and …

Inconel 718 superalloy has been fabricated by selective laser melting technology (SLM). Its
microstructure and mechanical properties were studied under solution+ aging (SA) standard …

Abstract Inconel 718 (IN718) samples have been produced by selective laser melting (SLM).
The effects of solution temperature, time and cooling rate as well as aging hardening on the …

The microstructure and tensile properties of selective laser melted (SLM) Inconel 718 alloy
were studied in the as-printed and different heat treat conditions. The SLM as-print …

This study evaluates the microstructural evolution and mechanical properties of a selective
laser melting (SLM) fabricated Inconel 718 (IN718) alloy under solution-aging treatment. It …

This study aims to address the fact that after the selective laser melting (SLM) of an Inconel
718 alloy, the microstructures at each fabrication position are anisotropic due to the coupling …

Inconel 718 produced by selective laser melting (SLM) has been characterized with focus on
the microstructure, the dependence of sample orientation on the mechanical properties and …

Abstract The Inconel 718 superalloy (IN718) was fabricated by selective laser melting (SLM)
successfully in this work. The optimization of process parameters and effects of three heat …

The microstructure evolution of Inconel 718 (IN718) superalloy fabricated by selective laser
melting (SLM) and wrought process during subsequent heat treatment process and their …

When Inconel 718 alloy is fabricated by selective laser melting and treated by traditional
homogenization plus double aging heat treatment (HA), its strength improves greatly, but …