Mg–Sn based alloys have great potential for high temperature applications because of the
formation of the thermally stable Mg2Sn phase in the as-cast condition. In the present …

The strontium (Sr) addition to the Mg–5wt.% Sn alloy results in grain refinement and the
formation of a rod-shaped and a bone-shaped MgSnSr intermetallic phase which are mainly …

The effects of Sr additions (0.3, 0.6 and 0.9 wt%) on the microstructural evolution, thermal
stability, and mechanical properties of a cast Mg–4Zn alloy were investigated. The extent of …

The microstructure and mechanical properties of Mg-Sn-Ca-Ce alloys with different Ce
contents (0.0, 0.2, 0.5, 1.0 wt%) were studied at room temperature. Ce additions to ternary …

In this study, the effect of Zn and Ca addition on microstructure and strength at room
temperature of Mg-Sn alloys was investigated by comparison of Mg-6Sn, Mg-6Sn-2Zn, and …

In this study, enhancement of mechanical properties of Mg-5Sn-3Zn alloy was achieved by
alloying with Ca, and the strengthening response due to coarse CaMgSn, nano and micro …

Abstract Mg-Sn-Mn-based alloys exhibit great application prospect because of their high
mechanical properties and good creep resistance. The content of Mn in Mg-Sn-based alloys …

In the present study, we have investigated the high temperature deformation behavior of Mg-
Sn (-Zn) based alloy systems in comparison with that of Mg-Al alloy. Compared with Mg-Al …

Abstract For the Mg–Sn–Al alloys, the ultimate strength (UTS) of an extruded Mg–9wt.% Al–
2wt.% Sn alloy reached 390 MPa. TEM observation indicated that plate-like Mg 17 Al 12 …

The microstructure and mechanical properties of Mg–3Sn–xZn–1Al alloys were investigated.
It was found that the grain size was basically similar, and the amount of fine Mg 2 Sn particle …