The electromagnetic and microwave absorbing properties of the nickel–copper (Ni–Cu)
nanoferrites and multi-walled carbon nanotubes (MWCNTs) filled into epoxy resin were …

MWCNTs/Co–Ni/Fe3O4 hybrid material has been successfully prepared by electroless
plating and coprecipitation method, which is applied to the low-frequency microwave …

The carbon nanotubes (CNTs) were filled with Fe nanoparticles via a wet-chemical method.
Microwave absorption, complex permittivity and permeability of the Fe-filled CNTs have …

The electromagnetic materials are featured by good magnetic permeability and dielectric
constant characteristics, which are of significant importance in solving the pollution problem …

The ferrite nanoparticles and ferrite/multiwall carbon nanotubes (Cu 0.25 Ni 0.25 Zn 0.5 Fe 2
O 4/MWCNTs) nanocomposites with different concentrations of MWCNTs as filler are …

A ferromagnetic γ-Fe2O3–MWCNT composite was prepared by a reverse microemulsion
technique, and was transformed to a Fe/Fe3C–MWCNT composite by further heat-treatment …

Multiwalled carbon nanotubes (MWCNTs) and FeNi nanopowders have been facilely
synthesized by a simple chemical method. Excellent microwave absorption properties have …

A hybrid composite based on 30 wt.% and 50 wt.% of MnZn ferrite and Carbonyl Iron (CI)
with 1 wt.% of carbon nanotube (CNT) dispersed on silicone rubber was produced to …

Abstract Fe 3 O 4/multi-walled carbon nanotubes (MWCNTs) sandwich buckypapers were
fabricated with monodisperse solutions of MWCNTs and Fe 3 O 4 nanoparticles through …

Composite microwave absorbers have been fabricated by Fe-filled carbon nanotubes
(CNTs) and a W-type hexagonal ferrite. The microwave absorption of the absorbers can be …