The effect of post-manufacture heat-treatment on the mechanical strength of an additively-
manufactured austenitic stainless steel has been investigated. Microstructural investigations …

The martensite to austenite reversion behavior of 90% cold rolled AISI 301 stainless steel
was investigated in order to refine the grain size. Cold rolled specimens were annealed at …

Martensite treatment is one of the known thermo-mechanical processes that can be used for
the grain refinement of metastable austenitic stainless steels. In this work, the martensite to …

In recent years, great attention has been focused on the development of nanostructured
stainless steels to improve their mechanical properties. This work reports the formation of …

Production of nano/submicron grained AISI 304L austenitic stainless steel through formation
of strain-induced martensite and its reversion to austenite are studied in this paper. The …

Nano/submicron austenitic stainless steels have attracted increasing attention over the past
few years due to fine structural control for tailoring engineering properties. At the …

In this work effects of the thermo-mechanical parameters were investigated in order to
achieve nanocrystalline structure in the as-cast AISI 301 stainless steel. In order to get …

In this work, coarse-grained 316L stainless steels were cold rolled with a thickness reduction
of~ 83%(CR 83%). After annealing, the behaviors of the nanostructured stainless steel …

Unlike conventional 17–4PH stainless steels where thermal treatment (solution annealing+
aging) leads to≈ 95% martensite and≈ 5% retained austenite, additively manufactured 17 …

The phase and microstructure evolution of a heavily cold-rolled AISI 301LN stainless steel
(SS), before and after annealing is discussed. AISI 301LN SS has been cold-rolled to 63 …