The microstructure evolution and mechanical properties of Mg− 15.3 Gd− 1Zn alloys with
different Al contents (0, 0.4, 0.7 and 1.0 wt.%) were investigated. Microstructural analysis …

The microstructure of an Mg–Zn–Ca extrusion was investigated by transmission electron
microscopy, and the interaction between dynamic precipitation and dynamic recrystallization …

This study investigates the influence of calcium (Ca) on grain boundary migration in pure
magnesium (Mg) during annealing. Pure Mg and Mg-0.5 Ca alloy samples undergo …

In order to control the grain size during hot forming, grain growth behavior of a pre-extruded
Mg-6Zn magnesium alloy and its correlation with solute and second phase distribution were …

We have studied the microstructure evolution and deformation behavior of Mg-5Gd-3Y-(1Sn)-
0.5 Zr alloys during hot compression (T= 350° C, 400° C, 450° C and 500° C, ε˙= 0.002 s− 1 …

Microstructure evolution, dynamic recrystallization (DRX) behavior and mechanical
properties of Mg–6Zn–1Mn-xGd alloys (x= 0, 0.2, 1.0 and 3.0 wt%) were investigated. The …

Recrystallization and grain growth in Mg-4.9 Zn-0.7 Zr and Mg-4.9 Zn-0.9 Y-0.7 Zr alloys as
a function of temperature on deformation were investigated with regards to hot rolling and …

A semi-solid microstructure of Mg–10Zn–6.8 Gd–4Y alloys is acquired via an isothermal
heat treatment process, and the effects of the holding time on the microstructure evolution of …

The microstructure and the mechanical properties of hot extruded Mg–Al–Zn alloy with the
addition of Y and Gd were thoroughly investigated under two different conditions with and …

A dispersion of Guinier Preston (GP) zones yields attractive mechanical properties in
wrought magnesium alloys. However, the precipitation of GP zones has been reported in a …