Abstract Mg-xAl alloys (x= 3–12 wt%) were prepared by high pressure solidification. The
microstructure of the alloys was studied using Scanning Electron Microscope (SEM) and …

The spheroidizing mechanism of W-phase in the Mg–Zn–Y–Mn–(B) alloys during solid-
solution treatment was investigated by using kinetic methodologies. The microstructure and …

Microstructure evolution of the cast Mg-9Gd-2Er-0.4 Zr alloy during solid solution treatment
at temperature of 460–520° C for 3–12 h was investigated by using optical microscope (OM) …

The present study investigates the grain refinement of Mg–3Al, Mg–6Al and Mg–9Al alloys
by calcium addition. The maximum reduction in grain size has been observed at 0.2% Ca …

We deeply analyze the deformation behavior of Mg-Gd-Nd (-Sm)-Zr alloys under high
temperature uniaxial compression, and explore the influence mechanism of Sm on the …

The microstructures of the as-cast and as-extruded Mg–14 wt.% Li–1 wt.% Al (LA141) and
Mg–14 wt.% Li–2 wt.% Sn (LT142) were observed by optical and scanning electron …

The effects of small additions of calcium (0.1% and 0.5% 1) on the dynamic recrystallization
behavior and mechanical properties of as-extruded Mg-1Mn-0.5 Al alloys were investigated …

The solidification characterization of Mg–x Zn–0.5 Zr (x= 0, 1, 3, 4, 5 wt%) alloys has been
extensively investigated through thermal analysis, microstructure characterization and …

The influence of homogenization treatment on microstructure evolution of Mg-5.8 Zn-0.5 Zr-
1.0 Yb (mass fraction,%) alloy was investigated under different annealing temperatures and …

The evolution rules of transitional phases β 1′ and β 2′ during single and double aging
and the heterogeneous nucleation of β 1′ rods on α-Mn particles in a Mg-6 wt% Zn-1wt …