The microstructure, mechanical properties and creep behavior of Mg–3Sm–0.5 Zn–0.4 Zr
(wt.%) alloy produced by ingot-casting and die-casting were investigated. The die-cast alloy …

Rapidly solidified (RS) Mg–Zn–Ca–Ce–La (wt.%) alloys have been produced via atomizing
the alloy melt and subsequent splat-quenching on the water-cooled copper twin-rollers in …

The morphology and crystallography of precipitates formed in three Mg-Al-Zn alloys
containing various Al/Zn ratios, conventionally designated as AZ91, AZ64 and AZ46, were …

The effect of strontium (Sr) addition (1 wt%) on the hot deformation behavior of Mg-7Sn
(wt%) was investigated by performing high temperature compression tests in the …

Abstract Mg–Al–Si–Ca and Mg–Zn–Ca base alloys were rapidly solidified bymelt spinning at
the cooling rate of about a million K/s. The melt-spun ribbons were aged in the range 100 …

In this study, the effect of Zn and Ca addition on microstructure and strength at room
temperature of Mg-Sn alloys was investigated by comparison of Mg-6Sn, Mg-6Sn-2Zn, and …

Both the solid solution and precipitation are mainly strengthening mechanism for the
magnesium-based alloys. A great number of alloying elements can be dissolved into the Mg …

Abstract Creep behavior of Mg–10Gd–xZn alloys was investigated with two Zn contents, 2
and 6 wt%. The as cast microstructure of alloys contained (Mg, Zn) 3 Gd phase at the …

The microstructural evolution and mechanical properties of Mg-5Y-5Gd-x Nd-0.5 Zr
magnesium alloys at different states were studied. The results reveal that island compounds …

In this study, the microstructures and textures of rolled and rolled/annealed Mg–1wt.% Mn-
based alloys containing different levels of Ce (from 0.05 to 1.0 wt.%) were examined. The Ce …