Correlations between stress corrosion cracking susceptibility and grain boundary microstructures for an Al–Zn–Mg alloy

XY Sun, B Zhang, HQ Lin, Y Zhou, L Sun, JQ Wang… - Corrosion science, 2013 - Elsevier
The correlations between grain boundary precipitates (GBPs) area fraction and stress
corrosion cracking (SCC) susceptibility for an Al–Zn–Mg alloy have been studied using TEM …

Influence of alloyed Sc and Zr, and heat treatment on microstructures and stress corrosion cracking of Al–Zn–Mg–Cu alloys

Y Shi, Q Pan, M Li, X Huang, B Li - Materials Science and Engineering: A, 2015 - Elsevier
Stress corrosion cracking (SCC) behavior of Al–Zn–Mg–Cu alloys with different Sc, Zr
contents and heat treatments was studied using slow strain rate test. Grain boundary …

Correlations between stress corrosion cracking, grain boundary precipitates and Zn content of Al–Mg–Zn alloys

C Meng, D Zhang, L Zhuang, J Zhang - Journal of Alloys and Compounds, 2016 - Elsevier
The stress corrosion cracking susceptibility of traditional Al–Mg alloys modified by Zn was
studied by using slow strain rate test both in the air and in 3.5 wt.% NaCl solution acidified …

Stress corrosion cracking and hydrogen embrittlement of an Al–Zn–Mg–Cu alloy

RG Song, W Dietzel, BJ Zhang, WJ Liu, MK Tseng… - Acta Materialia, 2004 - Elsevier
The age hardening, stress corrosion cracking (SCC) and hydrogen embrittlement (HE) of an
Al–Zn–Mg–Cu 7175 alloy were investigated experimentally. There were two peak-aged …

[HTML][HTML] Effects of critical defects on stress corrosion cracking of Al–Zn–Mg–Cu–Zr alloy

Y Sun, Q Pan, S Lin, X Zhao, Z Liu, W Li… - Journal of Materials …, 2021 - Elsevier
The effects of critical defects on stress corrosion cracking (SCC) of Al–7.82 Zn–1.99 Mg–
2.41 Cu–0.12 Zr alloy under under-ageing (UA), peak-ageing (PA) double-ageing (DA) and …

The effect of grain boundary character evolution on the intergranular corrosion behavior of advanced Al-Mg-3wt% Zn alloy with Mg variation

Q Ding, D Zhang, J Zuo, S Hou, L Zhuang… - Materials …, 2018 - Elsevier
The characteristics of grain boundary and grain boundary precipitates of Al-Mg-3wt% Zn
alloy with different Mg contents were systematically investigated. Observation by optical …

Correlations among stress corrosion cracking, grain-boundary microchemistry, and Zn content in high Zn-containing Al–Zn–Mg–Cu alloys

D Yuan, S Chen, K Chen, L Huang, J Chang… - … of Nonferrous Metals …, 2021 - Elsevier
The correlations among the corrosion behaviour, grain-boundary microchemistry, and Zn
content in Al–Zn–Mg–Cu alloys were studied using stress corrosion cracking (SCC) and …

[HTML][HTML] Effect of solution-treating temperature on the intergranular corrosion of a peak-aged Al-Zn-Mg-Cu alloy

Z Wang, H Jiang, H Li, S Li - Journal of Materials Research and Technology, 2020 - Elsevier
The effect of solution-treating temperature of 465–495° C on the intergranular corrosion
(IGC) susceptibility of the peak-aged Al-Zn-Mg-Cu alloy (7050) is investigated. The …

Effect of minor Sc addition on microstructure and stress corrosion cracking behavior of medium strength Al–Zn–Mg alloy

Z Li, H Jiang, Y Wang, D Zhang, D Yan… - Journal of materials …, 2018 - Elsevier
Influence of Sc content on microstructure and stress corrosion cracking behavior of medium
strength Al–Zn–Mg alloy have been investigated by optical microscopy, scanning electron …

Influence of aging temperature on corrosion behavior of Al–Zn–Mg–Sc–Zr alloy

C Li, Q Pan, Y Shi, Y Wang, B Li - Materials & Design, 2014 - Elsevier
Abstract Al–Zn–Mg–Sc–Zr alloy sheets were prepared using water chilling copper mould
ingot metallurgy processing which was protected by active flux. The effect of aging …