Cherry stones are utilized as a precursor for the preparation of activated carbons by
chemical activation with phosphoric acid (H3PO4). The activation process typically consists …

The preparation of activated carbons (ACs) from cherry stones and chemical activation with
H3PO4 can be controlled by the experimental variables during the impregnation step in …

The fabrication of activated carbon (AC) is widely carried out by the so-called chemical
activation method, in which the biomass substratum is put in touch with an impregnating …

Using cherry stones, the preparation of activated carbon has been undertaken in the present
study by chemical activation with potassium hydroxide. A series of KOH-activated products …

Five activated carbons with different porosity, prepared by chemical activation of peach
stones with phosphoric acid, have been further activated in a carbon dioxide gas flow at …

Three series of activated carbon have been prepared by heat treatment of peach stones
impregnated with solutions of phosphoric acid, in order to analyze the effect of phosphoric …

Two series of activated carbons were prepared from apricot stones by using carbonization
followed by steam activation and one-step pyrolysis/activation in steam. The pore structure …

In the preparation of activated carbon (AC) by the method of physical activation, the
carbonisation stage is usually carried out by heat treatment of a precursor at a given …

Cherry stones (CS) are carbonised at 400–1000° C for 0–4h in N2 and the charcoals
obtained are characterised to gain information about their chemical composition and porous …

Activated carbon (AC) was gained from Pinus montezumae (PM) wood sawdust and
chemical activation with K2CO3 was used for obtaining activated carbons. Variations in …