The effect of hot-water and alkaline pre-extraction of rice straw on soda-anthraquinone
pulping was carried out. The pre-extraction with hot water at 150° C for 1h dissolved 34.7 …

The influence of the pulping variables (active alkali charge, sulfidity, temperature and
pulping time) on the pulp yield, Kappa number and strength properties of Acacia mangium …

Hemicellulose, the second most common polysaccharide in nature, constitutes
approximately 20 to 35% of lignocellulosic biomass. Effective utilization of biomass, hitherto …

The utilization of steam explosion technology for the production of cellulose pulps was
evaluated at a bench scale using wheat straw as raw lignocellulosic material. Steam …

Sugarcane bagasse was delignified by a single-stage peracetic acid (PAA) pulping process.
It was found that temperature, pulping time, PAA loading, and liquor ratio all had very …

As cellulose triacetate is prepared from low‐grade hardwood dissolving pulp, a
considerable amount of the insoluble residue was present in the acetylation medium of the …

In this study, optimum ASAE (alkali-sulfide-anthraquinone-ethanol) pulping conditions of
wheat straw were determined. To this end, impregnation temperature, time to impregnation …

In this paper, mustard branches, mustard stems and lentil stalks were characterized in order
to evaluate them as pulping raw materials. These agricultural wastes are characterized by …

Abstract Effect of acetic acid (AcOH) addition on chemical conversion of Japanese beech
(Fagus crenata), as a hardwood, and Japanese cedar (Cryptomeria japonica), as a …

In order to analyse the fundamentals of alkaline chemi-mechanical pulping of hardwoods,
the chemical state of the wood was related to both the swelling level of fibres and the …