Abstract Effects of Ca content (0.0, 0.5, 1.0, 2.0 wt%) on the microstructure, texture and
mechanical properties of Mg-1.0 Sn-0.5 Zn-based alloys were investigated. The results …

Mg–5Sn–xZn alloys with varying Zn contents were subjected to indirect extrusion and the
effects of the Zn content on the microstructure and mechanical properties of the as-extruded …

The microstructure and tensile properties of the as-cast and as-rolled Mg–4.5 Sn–5Zn alloys
by adding various Sc content were investigated. Improvement of the tensile properties in as …

The microstructure and mechanical properties of Mg-Sn-Ca-Ce alloys with different Ce
contents (0.0, 0.2, 0.5, 1.0 wt%) were studied at room temperature. Ce additions to ternary …

In the present study, the comprehensive effects of Ce addition and pre-twining deformation
on the microstructure evolution and mechanical properties of Mg-1.0 Sn-0.5 Zn alloys were …

This work explored the effect of Cu addition on the microstructure characteristics and tensile
properties of as-extruded Mg–8Sn–2Zn alloys. Results indicated that adding Cu caused the …

Abstract The Mg-4Zn-0.5 Ca alloy was processed by the combination of forging,
homogenization and extrusion in present study. The results showed that homogenization …

Abstract Effects of Al addition to a Mg–Sn–Ca ternary alloy on its microstructure and tensile
properties after extrusion were studied via extrusion of Mg-1.0 Sn-0.5 Ca-xAl (x​=​ 0, 0.8 …

Abstract The Mg-8Gd-4Y–1Zn–Mn (wt%) alloys prepared by semi-continuous casting and
homogenizing treatment were extruded using different extrusion ratios and subsequent …

This work mainly studies the microstructure, texture and mechanical properties of Mg-8.5 Gd-
2.5 Y-0.3 Zr (wt%)(0Zn) and Mg-8.5 Gd-2.5 Y-0.5 Zn-0.3 Zr (wt%)(0.5 Zn) alloys under …