Highly processable bulk metallic glass alloys in the Pt–Co–Ni–Cu–P system were
discovered. The alloys show low liquidus temperature below 900 K, excellent processability …

Families of bulk metallic glass (BMG) forming alloys based on precious metal platinum and
gold are introduced. The gold-based BMGs have a gold content resulting in 18karat alloy …

Cylindrical glassy alloys with diameters up to 40 mm were prepared for a Pd 40 Ni 10 Cu 30
P 20 alloy with a high reduced glass transition temperature (T g⁄ T m) of 0.71 by water …

We report on differential scanning calorimetry (DSC) studies to characterize the
thermodynamics, kinetics and crystallization processes of the bulk metallic glass-forming …

抄録 The partial replacement of Ni by 30 at% Cu for the Pd 40 Ni 40− x Cu x P 20 alloys was
found to cause the drastic increase in the glass-forming ability as is evidenced from the …

Bulk amorphous alloys having dimensions of at least 1 cm in diameter have been prepared
in the Pd-Ni-P, Pd-Cu-P, Pd-Cu-Ni-P, and Pd-Ni-Fe-P systems using a fluxing and water …

Gold-based bulk metallic glass alloys based on Au–Cu–Si are introduced. The alloys exhibit
a gold content comparable to 18-karat gold. They show very low liquidus temperature, large …

Since glass-type alloys exhibiting glass transition and a large supercooled liquid region
prior to crystallization were found in metal-metal alloy systems such as Mg-Ln-(Ni,-Cu) 1 …

Formation of bulk metallic glass in quaternary Ti–Zr–Cu–Ni alloys by relatively slow cooling
from the melt is reported. Thick strips of metallic glass were obtained by the method of metal …

Since the success of forming bulk glassy alloys with a large supercooled liquid region before
crystallization and good mechanical properties in lanthanide (Ln)-1) and Mg-2) based …