Several candidate alloys (nickel-based Alloy 718, iron-based 316 L and 304 L stainless
steels) have been exposed to mixed proton-neutron particle fluxes and spectra at the Los …

The effect of strain rate on the tensile properties of neutron irradiated Inconel 718 has been
experimentally determined. Specimens were irradiated in the Experimental Breeder Reactor …

A cold-drawn Al/1 wt% Ni alloy irradiated to 1× 10 22 fast neutrons/cm 2 (E> 0.821 MeV)
and> 2× 10 22 thermal neutrons/cm 2 at 60° C in an aqueous environment contained …

Inconel alloy 600 specimens were irradiated with 1 MeV protons at 450° C to doses of 0.05,
0.5, and 5.0 dpa, at the 4 μm depth, to study the irradiation effect on the microstructural and …

Helium ions irradiation induced surface pattern and structural changes of Inconel 718 alloy
were studied with the combined utilization of atomic force microscopy (AFM), x-ray diffraction …

Inconel alloy 718 is a high-strength and corrosion resistant alloy that is commonly used as a
beamline vacuum window. The accumulation of irradiation-induced damage substantially …

Alloy 718 is generally considered a highly corrosion-resistant material but can still be
susceptible to stress corrosion cracking (SCC). The combination of factors leading to SCC …

Irradiations were performed with 1.5 MeV protons to 0.6 dpa at 40–150° C on additively
manufactured (AM) 304L stainless steel and the changes in microstructure and mechanical …

The nickel-based alloy Inconel 617 and Alloy 800H have been envisaged as the leading
candidate for the higher-temperature Molten Salt Reactors (MSRs) due to their superior high …

Tensile specimens, prepared from AISI 316L austenitic stainless steel in three conditions
(solution-annealed, cold-worked and electron-beam welded) and from OPTIFER martensitic …