Attempts to improve the strength of Gen3 Al–Li alloys without obviously deteriorating the
ductility have been directed towards enhancing the matrix precipitation of T 1 phase and …

A new ageing treatment method was developed in this work to improve the strength and
ductility of Al–Cu–Li alloy. Al–Cu–Li alloy treated via pre-deformation followed by double …

Al-Li alloys, known for their exceptional performance, are increasingly preferred in the
aerospace industry. In this study, Al-Li alloys were deformed by controlled temperature hot …

The T 1-precipitates and δ′/θ′/δ′ composite precipitates are the two primary
strengthening precipitates and co-exist in the age-hardened 3rd generation Alsingle bond Li …

Abstract Al–Cu–Li alloy is a huge potential alloy for aerospace industry due to its low density
and excellent comprehensive performances. In this study, the microstructures and …

The effects of aging treatment on the high temperature mechanical properties of cast Al–2Li–
2Cu-0.5 Mg-0.15 Sc-0.15 Zr-0.05 Ti alloy were investigated. Different test temperature (25° …

Abstract Third-generation Al–Li alloys, represented by 2195 Al–Li alloy, have considerable
application opportunities in lightweight aerospace structures. This work investigates the …

Pre-rolling deformation is a preferable procedure in practice, compared to pre-stretching, to
improve the performances of the rolled Al–Cu–Li plates. In the present work, the different …

Abstract Al–Cu–Li cast alloy components also show a promising application in the
aerospace industry due to their relatively good combination of density and performance …

Abstract High-strength Al–Cu–Li alloys are increasingly attractive for aerospace
applications. The highest-strength Al–Cu–Li alloys require a series of high-temperature …