Abstract Mg-Sn-Mn-based alloys exhibit great application prospect because of their high
mechanical properties and good creep resistance. The content of Mn in Mg-Sn-based alloys …

The microstructure and mechanical properties of Mg-Sn-Ca-Ce alloys with different Ce
contents (0.0, 0.2, 0.5, 1.0 wt%) were studied at room temperature. Ce additions to ternary …

The microstructure and mechanical properties of Mg–6Zn–1Mn alloys with varying Sn
contents (0, 1, 2, 4, 6, 8 and 10 wt.%) have been examined using optical microscopy (OM), X …

In this paper, the effects of minor Ti addition (0.1–0.3 wt.%) on the as-cast microstructure and
mechanical properties of Mg–3Sn–2Sr (wt.%) magnesium alloy are investigated. The results …

In this paper, the effects of Zr, Sc and Ce additions on the as-cast microstructure and
mechanical properties of Mg–3Sn–1Mn (wt.%) magnesium alloy were preliminarily …

The effects of Mn addition on the microstructure and mechanical properties of Mg–Zn–Sn
alloys have been investigated by optical microscopy (OM), X-ray diffraction (XRD), scanning …

The strontium (Sr) addition to the Mg–5wt.% Sn alloy results in grain refinement and the
formation of a rod-shaped and a bone-shaped MgSnSr intermetallic phase which are mainly …

Mg–Sn based alloys have great potential for high temperature applications because of the
formation of the thermally stable Mg2Sn phase in the as-cast condition. In the present …

In this paper, the effects of Y addition on the as-cast microstructure and mechanical
properties of the Mg–3Sn–2Ca (wt.%) magnesium alloy were investigated. The results …

In this study, enhancement of mechanical properties of Mg-5Sn-3Zn alloy was achieved by
alloying with Ca, and the strengthening response due to coarse CaMgSn, nano and micro …