Abstract A high-performance Mg-4.9 Gd-3.2 Y-1.1 Zn-0.5 Zr alloy has been fabricated by
multidirectional forging (MDF) after analyzing its compression behavior. The as …

The work hardening and softening behavior of pure Mg influenced by Zn addition were
studied through the neutron diffraction at STRESS-SPEC under in-situ tensile deformation …

Abstract Fine grained Mg–7Gd–5Y–1.2 Nd–0.5 Zr alloy was investigated by dynamic
compression tests using a Split Hopkinson Pressure Bar under the strain rates in the range …

In this work, the effect of Gd on the microstructure evolution and mechanical properties of Mg–
4Zn–0.6 Ca–xGd (x= 0, 0.3, 0.6 and 1, wt%) alloys were investigated systematically. The …

The effects of trace amounts of Ca on the microstructure and mechanical properties of as-
cast Mg− Sm− Gd− Zn− Zr alloy were systematically investigated mainly by means of …

By observing the microstructure evolution of Mg-Ga alloy during tensile deformation, it is
found that the prismatic< a> slip and the pyramidal< c+a> slip occur during the tensile …

Due to the insufficient slip systems, Mg and its alloys exhibit poor ductility during plastic
deformation at room temperature. To solve this problem, alloying is considered as a most …

The microstructure, high-temperature tensile properties and fracture behavior of the Mg-
10Gd-5Y-0.5 Zr alloy after thermo-mechanical processing (pre-tension between solution and …

The multi-pass hot compression deformation behavior of the cast alloy with the composition
of Mg-13Gd-4Y-2Zn-0.6 Zr, was investigated, and the four-pass compression tests were …

The microstructure evolution of Mg-5.65 Zn-0.66 Zr (wt.%) alloy was studied based on the
hot compression tests. The results indicated that the flow stress increased rapidly to a peak …