Microstructure, texture evolution and strain hardening behaviour of the Mg-1Y and Mg-1Zn
(wt%) alloys were investigated under room temperature compression. Microstructural …

The effect of strain rate on the microstructure and deformation mechanism of a Mg–Y–Nd–Zr
alloy was studied. The microstructure and texture were examined by optical microscopy and …

Microstructure and texture evolutions during tensile and compression deformation of an as-
extruded Mg–11Gd–4.5 Y–1Nd–1.5 Zn–0.5 Zr (wt%) alloy have been investigated using in …

The microstructure and texture evolution of as-extruded Mg-0.96 wt% Al-5.82 wt% Y
(denoted as Mg–1Al–6Y) alloy with strain at a temperature of 350° C and a strain rate of 0.1 …

The mechanical properties of Mg-Gd and Mg-Y solid solutions have been studied under
uniaxial tension and compression between 4 K and 298 K (− 269° C and 25° C). The results …

In the present work, the microstructure, texture and mechanical properties of the as-extruded
Mg–xZn–yEr (x= 3, 6 and 9; y= 0.5, 1 and 1.5; x/y= 6) alloys were investigated. The results …

The microstructure and texture development in a Mg–0.41 Dy (wt%) alloy after plane strain
compression (PSC) at 300° C under a strain rate of 10− 2 and 10− 4 s− 1 up a final true …

The deformation behavior of an extruded Mg–Zn–Zr alloy in the form of plate/sheet was
investigated on the basis of fine-grained and initial macro-texture along various directions …

The strain hardening is an effective mode of enhancing mechanical properties in alloys. In
this work, the strain hardening behaviors of Mg-xY (x= 1, 2, and 3 wt%) after extrusion …

The influence of Zn on the strain hardening of as-extruded Mg-xZn (x= 1, 2, 3 and 4 wt%)
magnesium alloys was investigated using uniaxial tensile tests at 10− 3 s-1 at room …