Recrystallization and grain growth in Mg-4.9 Zn-0.7 Zr and Mg-4.9 Zn-0.9 Y-0.7 Zr alloys as
a function of temperature on deformation were investigated with regards to hot rolling and …

In this work, the Mg-8.5 Gd-2.5 Y-0.3 Zr (wt.%) and Mg-8.5 Gd-2.5 Y-0.5 Zn-0.3 Zr (wt.%)
alloys were subjected to indirect extrusion. The microstructure and mechanical properties of …

The e ffect of thermomechanical processing on the microstructure, texture and mechanical
properties of a Mg-5.5 Gd-3.0 Y-1.0 Nd-1.0 Zr (wt.%) alloy was investigated using optical …

Abstract The effect of Zn/Gd ratio on dynamic recrystallization (DRX) of Mg–2Gd–xZn (x= 0,
1, 2 and 3 wt%) alloys was investigated by shear punch tests in the temperature range of …

The present work mainly focuses on the effect of minor content of Gd element on the
microstructure and mechanical properties of Mg-Zn alloy. The Mg-4Zn-xGd (x= 0, 0.5, 1, 2) …

This study revealed that the extrusion temperature has a great influence on microstructure
and mechanical properties of the Mg 97 Y 2 Zn 1 alloy. The average grain sizes increased …

The deformation behavior of Mg-3.7 Gd-2.9 Y-0.7 Zn-0.7 Zr magnesium alloy has been
investigated by thermal compression test conducted on a Gleeble-1500D thermal simulator …

Abstract Mg–Gd–Y–Zr alloys are among recently developed Mg alloys having superior
mechanical properties at elevated temperatures. Dynamic recrystallization (DRX) and rare …

The effects of the yttrium and zinc additions on microstructure and mechanical properties of
Mg–Y–Zn alloys were investigated. It was found that the addition of yttrium increases the …

Mg alloys containing high rare earth (RE) elements are hard to be rolled due to their low
ductility and high strength at low temperatures. Therefore, rolling at high temperatures is …