The spatio-temporal phase transformation and dynamic recrystallization (DRX) behaviors
during isothermal compression including resistance heating, temperature-holding and …

The thermal simulation compression tests of near-β titanium alloy Ti-5Al-5Mo-5V-1Cr-1Fe
were performed within the range of deformation temperatures of 710–860° C and strain …

In order to evaluate the dynamic recrystallization (DRX) behaviors in α+ β-phase
temperature range of Ti–6Al–4V alloy, a series of isothermal compression tests with a fixed …

Abstract Ti–6Cr–5Mo–5V–4Al (Ti-6554) alloy has wide applications for large load-bearing
components in the aerospace field. However, during the hot forming process of the alloy in …

A dynamic compression test was performed on α+ β dual-phase titanium alloy Ti20C using a
split Hopkinson pressure bar. The formation of adiabatic shear bands generated during the …

The isothermal tensile deformation behaviors of Ti-5Al-5Mo-5V-1Cr-1 Fe alloy in β phase
field are studied at the wide ranges of temperature and strain rate. The experimental results …

The effect of processing parameters, including deformation temperature, strain rate and
deformation degree on the microstructure evolution and the microstructure variables (grain …

Hot deformation behaviors and microstructure evolution of Ti− 3Al− 5Mo− 4Cr− 2Zr− 1Fe (Ti-
35421) alloy in the β single field are investigated by isothermal compression tests on a …

The microstructure development during concurrent hot deformation and β/α phase
transformation in a Ti–6Al–4V alloy was investigated in detail. The influences of deformation …

TiAl alloy is a potential candidate structural material for lightweight and high temperature in
aerospace, and multi-pass thermo-mechanical treatment, where dynamic recrystallization …