Polypropylene/surface modified clay nanocomposites were prepared by melt intercalation in
twin-screw extruder followed by blown film extrusion. The effects of organically modified clay …

The effects of clays as nanoscale fillers have been rarely addressed. Influence of the amount
of organoclay (ranging between 1 and 10 wt.%) on the nanocomposites structure, ie …

Polypropylene–clay nanocomposites (PPCN) were prepared by in situ grafting-intercalating
in melt. The organoclay was first modified with maleic anhydride (MA) in solution with a …

In this work, polypropylene/clay nanocomposites with 0.5, 1, 3, and 5 wt% of montmorillonite
(MMT)(unmodified clay) were prepared by intensive mixing at 50 rpm and 10 min of mixing …

The morphological, physical and mechanical properties of polypropylene/clay
nanocomposites (PPCNs) were prepared by in situ polymerization are investigated. Non …

Polypropylene (PP)/organoclay nanocomposites (PPNC) were prepared using a twice direct
compounding method in a twin screw extrusion process. Three grades of PP with different …

Nanocomposites of polypropylene with organically modified clays were compounded in a
twin‐screw extruder by a two‐step melt compounding of three components, ie …

Influence of nanoclay amount on surface properties of the nanocomposites was investigated
using Fourier transform infrared spectroscopy (FTIR), atomic force microscopy (AFM) …

Abstract Polypropylene/clay (PP/clay) nanocomposites were synthesized via intercalative
polymerization. The nanostructure of the composites was investigated by wide‐angle X‐ray …

Polypropylene (PP)/clay nanocomposites are prepared using different grades of PP,
compatibilizers, and organically modified clays. The melt intercalation of the PP is carried …