Abstract Martensitic Ni 50 Ti 50 wires and sheets with different textures were tensile tested in the temperature range between− 100° C and 60° C. The effect of texture and temperature on …
The effect of boundary condition on the mechanical behavior of superelastic NiTi shape memory alloys is investigated in this paper. Experimental tests were carried out on NiTi …
Y Liu, SP Galvin - Acta materialia, 1997 - Elsevier
It was observed that the reverse transformation of stress-induced martensite occurred at a temperature some 20 K higher than that of thermal martensite. The increase in temperature …
W Tirry, D Schryvers - Materials Science and Engineering: A, 2008 - Elsevier
At the proper composition and after receiving the appropriate thermomechanical treatment, NiTi shape memory alloys show shape memory and superelastic behaviour. These effects …
S Gao, S Yi - Materials Science and Engineering: A, 2003 - Elsevier
The pre-textured NiTi shape memory alloys (SMAs) are used in the mechanical testing. The pseudoelastic effect and the anisotropic behavior of NiTi SMA are observed. The material …
We carried out an in situ ultrasonic characterization of a NiTi shape memory alloy polycrystal subjected to pseudoplastic straining. The measurement leads to a full elastic tensor of the …
For a cold-rolled NiTi sheet, the tensile stress–strain curves show a flat stress-plateau during tension along the rolling direction, while under tension along the transverse direction the …
X Xie, Q Kan, G Kang, F Lu, K Chen - Materials Science and Engineering: A, 2016 - Elsevier
Formation and evolution of transformation domains in the super-elastic NiTi shape memory alloy (SMA) subjected to the strain-and stress-controlled cyclic tension-unloading tests were …
The stress–strain curves of polycrystalline martensitic NiTi shape memory alloys are often different for loading under tension and compression. Under tension, a flat stress-plateau …