Abstract The effect of Ce/La misch metal addition on the microstructural evolution of as-cast
and as-soluted Mg-5.3 Zn-0.5 Ca (wt.%) alloys was systematically investigated. It was found …

Rapidly solidified (RS) Mg–Zn–Ca–Ce–La (wt.%) alloys have been produced via atomizing
the alloy melt and subsequent splat-quenching on the water-cooled copper twin-rollers in …

The microstructure and mechanical properties of a Mg-Zn-La alloy with and without Ca were
investigated in the present study. Results indicated that small addition of Ca in Mg-Zn-La …

The effects of Ag on the microstructure and mechanical properties of a Mg-9Gd-3Y-1Zn-0.8
Mn alloy have been investigated. Microstructural analysis indicates that the (Mg, Zn) 3 (Gd …

The effects of Ti additions (0, 0.4, 0.6, 0.8, 1.0, 1.2 wt.%) on the microstructure and
mechanical properties of as-cast and aging Mg-0.4% Zn-1.0% Zr-1.5% Ca (wt.%) alloys …

Microstructure evolution of Mg–10Gd–3Y–1.2 Zn–0.4 Zr alloy during high temperature heat-
treatment at 773K in the time range 12–72h is investigated. Addition of 1.2% Zn increases …

Rapidly solidification/powder metallurgy (RS/PM) Mg–6Zn–5Ce–1.5 Ca (wt.%) alloy in form
of rods has been prepared by hot extrusion with RS powders, produced via atomizing the …

The rapidly solidified (RS) Mg–Zn–Ca based alloys with Ce addition were produced via
atomising the alloy melt and subsequently splat quenching the atomised droplets on the …

With the purpose of increasing our understanding of the microstructural evolution and
mechanical properties of Mg-Al-Zn-Ca-RE system alloy, Mg-xAl-(8-x) Zn-4Ca and Mg-xAl-(8 …

The microstructure evolution and mechanical properties of Mg− 15.3 Gd− 1Zn alloys with
different Al contents (0, 0.4, 0.7 and 1.0 wt.%) were investigated. Microstructural analysis …