… 6/7, 12/10, 12/11, 12/13, and 12/14 stator/rotor poles, etc., on … flux-switching PM (FSPM)
machines with all and alternate poles … machine are all significantly affected by the stator and rotor …

… machine topologies that have been proposed do not exploit the ability of increasing the
number of rotor poles … the feasibility of a family of machines described by the pole design (PD) …

… poles than rotor poles. This paper presents the advantages of a novel SRM configuration
with the number of rotor poles greater than the number of stator poles… is based on a pole-design …

… It shows that the optimized rotor pole number should be close to the number of stator
poles, whereas larger torque can be obtained by the machine with relatively higher rotor pole …

… The odd rotor pole machines, such as those with 5 and 7 rotor poles, exhibit more sinusoidal
back-EMF and flux linkage than those with 4 and 8 rotor poles. In all these combinations, …

… of stator poles has to be equal to the number of rotor poles. This rule limits substantially the
choice of machine types that can be built with more than one number of poles, ending up with …

… FSPM machines. Thus, this paper investigates the influence of the stator pole and rotor pole
… the torque capability of multi-tooth FSPM machines. A simple analytical model is developed …

… inner diameters of the REAFSPM machine, respectively, βrp = 2π/Pr is the rotor pole pitch
angle, rav is the average radius of the machine. βrso is the rotor slot-opening angle and βsso …

… rotor pole combination and the electromagnetic performance of the switched-flux PM (SFPM)
machine … A new SFPM brushless machine with remarkable slot opening relative to the …

… machines have the disadvantage of unbalanced magnetic force compared to the machines
with an even number of rotor poles… , rotor pole shaping by introducing flange in the rotor teeth …