… into the vulcanizates by means of a swelling technique. The vulcanizates were swollen in
a … After 72 hours at room temperature in this solution, the samples were removed, dried in …

… temperature of exposure in an air aging test on the rate of deterioration of the properties of
typical vulcanizates of natural rubber, GR-S, GR-I, nitril rubber … is at room temperature or at an …

… Because the χ values are independent of temperature, the χ values of EPDM and PP at
170 C were determined at room temperature by contact angle method with a Dataphysics …

… activated blacks, or reduction in hysteretic nature by heat treatment do not explain why
either should have so little effect at room temperature and yet so seriously impair high …

… h at room temperature, and then the mixture was aged for 24 h to allow it to reach equilibrium.
The mixture was then cast into 10 × 10 cm thin films and dried at room temperature for 24 …

… The rubber compounds were left at room temperature for 24 hours before testing. Vulcanization
was carried out in an electrically heated hydraulic press at 150C using the optimum cure …

… rubber matrix. When the ESR measurements for the stretched samples were carried out at
room temperature… In this study, swelling tests were carried out by toluene at room temperature …

… in base and oil-extended rubber and rubber vulcanízales. This paper describes a very fast
method for identifying a wide variety of rubber antioxidants by means of extraction followed by …

… In the present study, tensile strength was determined only at room temperature and at a
single rate, but the data can be used to construct a section of a failure envelope by plotting …

… Kyunggi-do, Korea) for 24 h at room temperature to extract the free organic materials in the
sample… , Kyunggi-do, Korea) for 48 h at room temperature. After that, the weight of the swollen …