… salt rejection properties simultaneously compared with those constructed on pristine PSf
substrates… hydrophilicity of the pore wall inside the substrate. Furthermore, the coated PDA layer …

… salt rejection were reported on any TFC membranes. Considering both water permeability
and salt rejection … work was the membrane made over substrate of 15 wt.% PSf concentration. …

… membranes were fabricated by interfacial polymerization on polysulfone (PSf) sublayer using
m… Permeability, salt rejection and pepsin macromolecule rejection of prepared membranes …

… Knowing the salt concentration in feed side (1000 ppm of NaCl solution, C f ) and permeate
solution (C p ), the salt rejection of every TFC-FO membrane (R s ) was eventually measured …

… This, in turn, assisted in obtaining a defect-free, highly salt rejecting PA active layer in the
final TFC-FO membranes. To the best of our knowledge, this is the first time layered FO MMM …

… S5 indicated the nanopore of the substrate had inevitable … the salt rejection rate that the
shrinkage of the nanopore for the substrate should had no influence on the final salt rejection of …

… COFs, GO, NH 2 -MWCNT or ZIF) by interfacial polymerization, the nanofiltration membrane
prepared in this work shows distinct advantages in terms of both the flux and salt rejection. …

… less polar polyethersulfone (PES) component into polysulfone (PSf) component in the porous
… It is demonstrated that high water flux FO membrane with stable high salt rejection may be …

… membrane on a microporous polysulfone substrate via interfacial poly… excellent salt rejection
and high water permeability barrier on the surface of the microporous polysulfone substrate. …

… The observed trends on salt rejection and salt permeability … positively influenced the salt
rejection performance of GOT-… thereby negatively affected the salt rejection ability of GOT-0.5 …