… been fabricated successfully by selective laser melting technology. The effects of slice
thickness, building direction, overlap rate and hatch angle on tensile properties of SLMed 304 …

… , the tensile properties may vary due to the anisotropic microstructure. Orientation-dependent
mechanical properties … -built tensile specimens were demonstrated that the tensile strength …

… The results indicate that the room temperature tensile properties can be tuned (between YS:
… the selective laser melting process giving an opportunity to define the mechanical properties …

Iron, as the basic industry material was extensively studied in the past, but it could still offer
extended possibilities with the use of new processing techniques such as selective laser …

… prepared by selective laser melting (… tensile properties measured before and after HIPing.
It was found that the porosity level generally decreased with increase of laser power and laser …

… In this work the tensile behaviour of selective laser melted (… Consequently, the tensile
properties of the SLMed Al alloy A357 … tensile ductility (at its maximum >23%) and reduced tensile …

… In this study, the effect of laser process parameters on the density, surface morphology, …
and tensile property of SLMed Ti6Al4V parts was investigated. With the increase of laser power …

… Tensile properties We investigated the tensile properties of L-PBF Ti64 as a function of
laser parameters (power and speed), the build orientation regarding to the loading direction (0 …

… and mechanical properties development in AlSi10Mg alloy fabricated using Selective Laser
… -enriched cellular dendritic network, resulting in tensile strengths exceeding the castings. To …

… on the tensile properties of a selective laser melt 316L alloy was investigated. Tensile test
… and tensile tested in LS-DYNA in order to determine the effect of residual stresses on the …