… beam-columns. The tests were conducted in a purpose built test rig capable of applying load
and moment … varying load/moment ratios, at two different ratios of end moment. The results …

… force, bending moment and shear force at section E1/W1, respectively; E, A and I are the
Young’s modulus, cross-sectional area and second moment of area of the beam, respectively; …

… 2 are the column shear forces … column tips, and thus they can be easily obtained by the
condition of load equilibrium. When the yield moment M by and plastic moment M bp of the beam …

… yu is the ultimate moment of the composite beam-columns under constant axial load level
(n), and can be determined by using the axial load versus bending moment interaction curve (…

… ), while the column buckling strengths (ie the column end … hollow section (SHS and RHS)
beam-column strengths. Use of the … bending moment capacities and revised column buckling …

… I-beam-to-SHS-column joints made with passing-through plates under opposite hogging/sagging
bending moments… The behaviours of joints constructed with SHS and CHS columns are …

… for stainless steel SHS and RHS beam-columns under uniform bending moment and then
through the employment of more suitable equivalent uniform moment factors, underpinned by …

… [5] proposed a bolted end-plate connection between wide-flange I-beam and RHS column
… an I-beam-to-SHS column connection caused by the bending moment adversely affected the …

… of beam-to-column connections for steel-framed building modules with RHS and SHS sections
of … 1d) and moment-resisting beam-to-column connections is encouraged for steel-framed …

… beam-to-column connections are fabricated by shop welding. Some studies on SHS column
moment … and end-plate moment connections for SHS column are investigated and design …