… Also the question whether, by modification of spinning conditions, mechanical performance
can be significantly improved has been subject to intensive studies and theoretical …

… of different PLA types by a high-speed melt-spinning process because the fiber-forming …
high-speed spinning process? The effects of different PLA grades and melt-spinning conditions …

… spinning and its thermal and rheological properties to derive suitable parameters for the
high-speed spinning and spin … to the use of different PLA provenances and spinning conditions. …

… For many years in the fiber industry, cross-flow quench has been widely employed in the
melt spinning process. However, when this type of quench was used in high speed spinning, …

… The viscoelastic and inertial mechanisms require that spinning speed is sufhciently large.
In a series of spinning conditions, low speeds correspond to non-necking and higher speeds …

… effect of the melt spinning conditions, high-speed melt spinning, and spin-drawing process
on … An investigation was carried out on the effects of spinning conditions on the orientation in …

… ABSTRACT: Poly(L-lactic acid) filaments were prepared by high speed melt spinning at take-up
… polymer used in this study could be easily spun under a variety of spinning conditions. In …

… conditions such as rotating speed, spinning head diameter, nozzle diameter, and nozzle-collector
distance. To date, the exploration in potential applications of centrifugally-spun …

… the threadline depending on the spinning conditions. The primary factors are … spinning
speeds are increased the neck location moves closer to the spinneret and when, at a given speed…

… speed. A latively fine, strong-fibered cotton was necessary for spinning at high rotor speeds.
… and yarns from a combed cotton was less at high rotor speeds, evidently as a result of more …