… In order to evaluate the corrosion of steel bars embedded in the fiber reinforced mortars,
with and without additions, two techniques were utilized. As mentioned earlier the methods …

… shrinkage behavior of steel fiber reinforced alkali-activated slag/silica fume (AASS) mortars
were … the mechanical properties of AASS mortar by incorporation of steel fibers. The effect of …

… paper was to assess the influence of recycled steel fibers sourced from end-life tires on the
mechanical performance of self-compacting ultra-high performance mortars. For this purpose, …

… Then the orientation distribution of the steel fibers in ASFRC is measured by X-CT … steel
fibers in ASFRC reaches around 0.90, while that of ordinary steel fiber reinforced cement mortar (…

… steel fibers were added to the mortar mixture at ratios of 1%, 2%, and 4% by volume and
sticking ability of the mortar … It was concluded that addition of 2% steel fiber and using plasticizer …

… of this superior mortar, it … steel fibers under triaxial loading is investigated, and results are
compared with a common HPC. Two types of SFRCM with 1% and 2% volume fraction of steel …

… Micro Steel Fiber - Brass-coated micro steel fibers were used to increase the ductility of the
mixes. The engineering properties of steel fibers are given in Table 2. Steel fibers have the …

… the success of fiber reinforced repair mortars depends on the … , the performances of SCRMs
incorporating steel fibers were … fiber amounts were determined for the selected steel fibers to …

… of steel fibers to the high performance mortars, aimed to constrain the volume change of
mortars … the initiation and propagation of micro-defects in mortars. However, this finding was not …

… slag-based mortar reinforced with Micro-steel, PVA and Basalt Fiber is investigated. … steel
fiber reinforced alkali-activated mortar. In case of micro-steel fibers, the concrete mix and fibers …