… behaviors of an extruded Mg-Dy-Zn alloy from RT to 300 C at strain rates from 3 × 10 − 5 s …
Mg matrix to LPSO phase at high strain rate, while the deformation behavior at low strain rate …

… Mg-4Zn alloy suffers SCC at all the strain rates tested in this study, seen by reduction in
UTS and ductility and from the appearance of SCC features on the fractured surfaces. …

… of Mg alloys to the clinical applications is their rapid degradation behavior. In the present
study, high strain rate … Weight loss rate decreases with the higher Sr content and Mg-4Zn-0.2Sr …

… temperature using a CMT5105 material testing machine at a strain rate of 10 −3 s -1 . The …
as-extruded Mg-1Zn and Mg-4Zn alloys. The dislocation structure in the as-extruded Mg-4Zn …

… rate and the punch stress values were converted to the equivalent tensile creep strain rate …
for obtaining steady state creep rates from impression data, the strain rates are plotted against …

… on dynamic recrystallization (DRX) of Mg-5Zn-1Mn alloy during high strain rate ( ε ̇ =9.1 s
−… the strain corresponding to the maximum softening rate and the critical strain corresponding …

… few reports on the strength loss of magnesium alloy due to bio-… strength of Mg-4Zn sheet
prepared by high strain rate rolling … of the Mg alloy sheet prepared by high strain rate rolling in …

… Mg−4Zn−2Sn−2Al (ZAT422) alloy, a series of compression experiments with a height reduction
of 60% were performed in the temperature range of 498−648 K and the strain rate range …

… It has been reported that the critical stress of DRX is strongly related with the deformation
temperature and strain rate, and usually increase with the increase of strain rate at low …

… The dynamic microstructural evolution of the Mg–4Zn–2Al–… strain rate of 0.01 s −1 and 5 s
−1 at 548 K and the strain rate … were affected by both strain rate and temperature. Parallel or …