… displacement distribution-based strength assignment strategy that does not require the
knowledge of stiffness distribution prior to strength … and FfR are the magnitudes of strength of the …

… , the total fault length and displacement are measured when … of magnitude larger than typical
fault length–displacement … ; so long as the yield stress or strength is reached, the flow can …

… The yield strength is taken to be the peak shear strength (or … , the peak strength of the
rock mass at any given depth. Rock … The magnitude of maximum displacement for a fault on …

… strength ratio on residual displacement ratios is presented in this section. Residual displacement
ratios plotted as a function of lateral strength ratio … magnitude on residual displacement …

… and the rock's yield strength), and the properties of the … of magnitude in displacement deficit
(or excess) relative to tall 2-D fractures and comparable scatter on maximum displacement vs…

… of strengthening with displacement decreases with displacement … in little or no strength
variation with displacement, g being -… magnitude of the initial peak strength (0.74-0.80) and of the …

… displacement for a given slope is associated with the I a , the magnitude of the total permanent
displacement … reevaluation incorporating the effect of degradation of shear strength of soil. …

… non-linear force-displacement hysteretic behavior of reinforced … loading paths and magnitudes
of lateral displacement in the … of both normal and high strength concrete columns or the …

… used to monitor displacement at four different points to study the effects of variation of three
rock mass strength properties (friction, cohesion, and tensile strength) on displacement. The …

… The magnitudes of diaphragm moments and shear forces are controlled by the positions of
… As nominal yield displacements are independent of strength, displacement limits for ductile …