… ], which was consistent with the actual work conditions and structural characteristics of the
corrugated shear wall, and the hysteresis test in this study also followed this loading principle. …

… A second phase, Phase II, of subassemblage testing was conducted to investigate
additional SC-SPSW design variations including HBE depth, web plate-to-fish plate connection …

… Single strand steel wedge/barrel anchors were used to pull the PT strands until failure,
resulting in anchor conditions similar to those in the subassemblage experiments. The strand …

… shear walls and rink members of slabs and lintels. In this study, the nonlinear static analysis
of two RC shear wall … of the specimen in accordance with the test result. On the other hand, …

… loading tests on a simple tuff masonry subassemblage with … two tests were carried out on
the URM subassemblage in as … the third test was carried out on the subassemblage repaired …

… In experiments the behavior of a structure can be reasonably well simulated by a subassemblage.
A … shear wall in a reinforced concrete structure, experiments show that the factors µ 0 …

… subassemblages in a new type of hybrid coupled wall system for seismic regions. Coupling
of concrete walls is achieved by posttensioning steel beams to the walls … hybrid coupled wall …

… wall subassemblages (Della Corte et al. 2003; Fiorino et al. 2004). One subassemblage was
tested under … The generic stud shear wall subassemblage is considered a good prototype of …

… Due to their low aspect ratio, they are prone to shear or sliding failure. A shear wall was
subjected to a cyclic test at the new Multi-Axis Sub-Assemblage Testing (MAST) facility at ETH …

… impossibility of being able to perform experimental tests on specimens of the different
precast RC wall techniques. Displacement controlled tests have been simulated using non-linear …