… with the synthesis of poly(ethylene terephthalate/isophthalate) copolymers (Fig. 1) and the
effect of IPA content on PET copolymer's thermal behavior and tensile mechanical properties. …

… The second area concerns the tensile behavior of drawn sheets of poly(ethy1ene
terephthalate) which are then redrawn in directions making various angles with the initial draw …

… In this work, commercially available polyethylene terephthalate of 0.80 dl/g (IV) called
oZpet TM (GG-3180 FGH, by Leading Synthetics, Australia) was used. Exfoliated Graphene …

… behaviour, based on experiments carried out on single filaments. Both fibres show similar
non-linear tensile behaviour, with … The shape of the tensile loading curve is explained by the …

… In this paper, the temperature dependence of the tensile behavior in PBT with different
crystallinity was investigated. The yield stress at various temperatures can be described by the …

A detailed study has been undertaken of the drawing behaviour of poly(ethylene terephthalate)
over the temperature range 20 to 80C. Cold drawing behaviour was observed at the …

… of polyethylene terephthalate have been deformed in tension and simple shear, with the
primary variable as the angle between the tensile … paper, on the basis of the tensile behaviour. …

… of two immiscible blends, poly(ethylene terephthalate)(PET)/polyethylene(PE) and
polycarbonate(PC)/ PE, and its influences on the tensile behavior of the injection molded blend bars, …

The crystallization of poly(ethylene terephthalate) (PET) under tensile strain was investigated
using wide angle X-ray diffraction. Real-time investigation of the crystallization state, …

… A wide range of polyethylene terephthalate fibres was prepared by melt spinning to different
degrees of molecular orientation. The tensile drawing behaviour of these fibers was then …