… Wire arc additive manufacturing (WAAM) is a class of technologies suitable for producing …
the microstructure of a thick 316LSi WAAM part is characterised in detail. The microstructure of …

… dual-alloy microstructures. Samples were built using alternating feed wires of commercially-…
extreme than that of their respective constituent feed wires. The yield strength of the dual …

… -alloyed creep resistance steel P91 using wire arc additive manufacturing, has been
successfully achieved in this study. A systematic microstructural characterization of specimen at as-…

… Wire arc additive manufacturing (WAAM) is a metal 3D … into the mechanical properties and
microstructure of WAAM plates … Microstructural characterisation was also performed by means …

… for wire arc additive manufacturing of aluminium [36]. The aim of the present work was to
understand the influence of the wire arc … , including detailed microstructural characterisation. …

… is fed from a continuous reel to an arc-… the wires are placed at approximately 4 mm apart.
Opposite charges are then passed through the wires, which create an arc that melt the wires. …

… WAAM is characterised by high … , microstructures and mechanical properties of the weld
when the manufacturing process is plasma induced arc-based WAAM process with double wire …

… Gas metal arc welding based on wire arc additive … cable wire composed of three filaments
with different elemental compositions was used as the feeding material. The microstructure …

… fabricated using the double-wire arc additive manufacturing method (WAAM). Due to the
influence of Al concentration, the morphology, microstructure, mechanical properties and …

… In this paper, in-depth multiscale microstructure characterisation has been … microstructure
and subsequent thermal cycling on the α precipitation behaviour in a wire and plasma arc AM …